Info: 'The Finder is currently inaccessable for that operation!'
2:
Bounds: x1=20, y1=10, x2=52, y2=42
Type: -96
Info: ' '
DITL_720.txt
Items: (3 entries)
0:
Bounds: x1=307, y1=114, x2=375, y2=134
Type: 4
Info: 'OK'
1:
Bounds: x1=73, y1=7, x2=378, y2=102
Type: -120
Info: 'Unable to complete this operation due to full memory or a problem with the system.To free memory, close windows or quit applications. Otherwise, you may wish to restart the computer and use “Disk First Aid.”'
2:
Bounds: x1=20, y1=10, x2=52, y2=42
Type: -96
Info: ' '
DITL_715.txt
Items: (3 entries)
0:
Bounds: x1=307, y1=98, x2=375, y2=118
Type: 4
Info: 'OK'
1:
Bounds: x1=73, y1=7, x2=376, y2=86
Type: -120
Info: 'Unable to access settings for an application that is open or busy.To access these settings, you must first quit the application or close its resource file.'
2:
Bounds: x1=20, y1=10, x2=52, y2=42
Type: -96
Info: ' '
DITL_710.txt
Items: (3 entries)
0:
Bounds: x1=234, y1=131, x2=298, y2=151
Type: 4
Info: 'OK'
1:
Bounds: x1=311, y1=131, x2=375, y2=151
Type: 4
Info: 'Cancel'
2:
Bounds: x1=73, y1=7, x2=376, y2=119
Type: -120
Info: 'You are setting OptiMem to optimize ALL unspecified or unknown programs.(Some programs may not perform well while OptiMem is learning their features. Remember to save your work often and to reset this state after testing is complete.)'
DITL_705.txt
Items: (3 entries)
0:
Bounds: x1=267, y1=115, x2=335, y2=135
Type: 4
Info: 'OK'
1:
Bounds: x1=73, y1=7, x2=335, y2=103
Type: -120
Info: 'Unable to list all of the programs on this disk.To select any not listed, choose “Select Other Application…” from the File menu and use the directory dialog box.'
2:
Bounds: x1=20, y1=10, x2=52, y2=42
Type: -96
Info: ' '
DITL_700.txt
Items: (3 entries)
0:
Bounds: x1=307, y1=98, x2=375, y2=118
Type: 4
Info: 'OK'
1:
Bounds: x1=73, y1=7, x2=376, y2=86
Type: -120
Info: 'Memory required to complete this operation is unavailable.To free memory, close windows or quit applications.'
2:
Bounds: x1=20, y1=10, x2=52, y2=42
Type: -96
Info: ' '
DITL_451.txt
Items: (6 entries)
0:
Bounds: x1=321, y1=222, x2=405, y2=242
Type: 4
Info: 'OK'
1:
Bounds: x1=78, y1=130, x2=407, y2=210
Type: -120
Info: 'If the application won’t work with these settings, try increasing “Initial memory block size” or using a lower “Optimization method.”(Check “More,” and use “Balloon Help” for hints.)'
2:
Bounds: x1=78, y1=11, x2=406, y2=58
Type: -120
Info: 'The Settings Wizard has no more suggestions for “^0”'
3:
Bounds: x1=14, y1=9, x2=58, y2=53
Type: 64
Info: '0'
4:
Bounds: x1=14, y1=9, x2=58, y2=53
Type: -96
Info: '0'
5:
Bounds: x1=78, y1=55, x2=406, y2=118
Type: -120
Info: 'You may wish to consider adjusting the “Fast access reserve” or the “Initial memory block size” to balance memory usage against application performance.'
DITL_450.txt
Items: (5 entries)
0:
Bounds: x1=335, y1=191, x2=403, y2=211
Type: 4
Info: 'OK'
1:
Bounds: x1=78, y1=99, x2=407, y2=179
Type: -120
Info: 'If you find problems with current settings, try increasing the “Initial memory block size” or selecting a lower “Optimization method.”(Check “More,” and use “Balloon Help” for hints.)'
2:
Bounds: x1=78, y1=11, x2=405, y2=100
Type: -120
Info: '“^0” didn’t waste much memory when last opened. If this session was not typical of your normal use, you may want to test it again.'
3:
Bounds: x1=14, y1=9, x2=58, y2=53
Type: 64
Info: '0'
4:
Bounds: x1=14, y1=9, x2=58, y2=53
Type: -96
Info: '0'
DITL_431.txt
Items: (6 entries)
0:
Bounds: x1=286, y1=234, x2=386, y2=254
Type: 4
Info: 'Try New Size'
1:
Bounds: x1=147, y1=234, x2=273, y2=254
Type: 4
Info: 'Do Not Change'
2:
Bounds: x1=78, y1=11, x2=388, y2=129
Type: -120
Info: '“^0” did not use ^2K of the ^1K of memory reserved for it. If this session was typical of your use, reducing the “Initial memory block size” to ^3K could make more memory available for other applications.'
3:
Bounds: x1=78, y1=126, x2=393, y2=222
Type: -120
Info: 'Warning: This suggestion is below the application’s minimum size. If it works, more memory will be saved, but the application might complain or actually have problems.Try an “Initial memory block size” of ^3K?'
4:
Bounds: x1=14, y1=9, x2=58, y2=53
Type: 64
Info: '0'
5:
Bounds: x1=14, y1=9, x2=58, y2=53
Type: -96
Info: '0'
DITL_430.txt
Items: (6 entries)
0:
Bounds: x1=287, y1=154, x2=387, y2=174
Type: 4
Info: 'Try New Size'
1:
Bounds: x1=148, y1=154, x2=274, y2=174
Type: 4
Info: 'Do Not Change'
2:
Bounds: x1=78, y1=11, x2=388, y2=129
Type: -120
Info: '“^0” did not use ^2K of the ^1K of memory reserved for it. If this session was typical of your use, reducing the “Initial memory block size” to ^3K could make more memory available for other applications.'
3:
Bounds: x1=78, y1=126, x2=392, y2=142
Type: -120
Info: 'Try an “Initial memory block size” of ^3K?'
4:
Bounds: x1=14, y1=9, x2=58, y2=53
Type: 64
Info: '0'
5:
Bounds: x1=14, y1=9, x2=58, y2=53
Type: -96
Info: '0'
DITL_420.txt
Items: (6 entries)
0:
Bounds: x1=270, y1=138, x2=380, y2=158
Type: 4
Info: 'Better Method'
1:
Bounds: x1=136, y1=138, x2=257, y2=158
Type: 4
Info: 'Do Not Change'
2:
Bounds: x1=78, y1=11, x2=380, y2=113
Type: -120
Info: '“^0” is not set to use the best OptiMization method. Using “Fully access all free memory” might make more memory available for both this application and others.'
3:
Bounds: x1=78, y1=110, x2=378, y2=126
Type: -120
Info: 'Try a better OptiMization method?'
4:
Bounds: x1=14, y1=9, x2=58, y2=53
Type: 64
Info: '0'
5:
Bounds: x1=14, y1=9, x2=58, y2=53
Type: -96
Info: '0'
DITL_412.txt
Items: (6 entries)
0:
Bounds: x1=297, y1=138, x2=381, y2=158
Type: 4
Info: 'OptiMize'
1:
Bounds: x1=152, y1=138, x2=284, y2=158
Type: 4
Info: 'Do Not OptiMize'
2:
Bounds: x1=78, y1=11, x2=382, y2=113
Type: -120
Info: '“^0” is set to be NOT OptiMized. When opened last, it used most of the ^1K of memory it reserved. OptiMizing it could make all additional free memory available as well.'
3:
Bounds: x1=78, y1=110, x2=379, y2=126
Type: -120
Info: 'Would you like to OptiMize this application?'
4:
Bounds: x1=14, y1=9, x2=58, y2=53
Type: 64
Info: '0'
5:
Bounds: x1=14, y1=9, x2=58, y2=53
Type: -96
Info: '0'
DITL_411.txt
Items: (6 entries)
0:
Bounds: x1=289, y1=127, x2=373, y2=147
Type: 4
Info: 'OptiMize'
1:
Bounds: x1=144, y1=127, x2=276, y2=147
Type: 4
Info: 'Do Not OptiMize'
2:
Bounds: x1=78, y1=11, x2=377, y2=102
Type: -120
Info: '“^0” is set to be NOT OptiMized. When last used, it wasted ^1K of memory which might have been reclaimed if OptiMized.'
3:
Bounds: x1=78, y1=99, x2=377, y2=115
Type: -120
Info: 'Would you like to OptiMize this application?'
4:
Bounds: x1=14, y1=9, x2=58, y2=53
Type: 64
Info: '0'
5:
Bounds: x1=14, y1=9, x2=58, y2=53
Type: -96
Info: '0'
DITL_410.txt
Items: (6 entries)
0:
Bounds: x1=293, y1=138, x2=377, y2=158
Type: 4
Info: 'Custom'
1:
Bounds: x1=148, y1=138, x2=280, y2=158
Type: 4
Info: 'Keep Standard'
2:
Bounds: x1=78, y1=11, x2=378, y2=113
Type: -120
Info: '“^0” is using its “Standard” active settings, which may not be changed. In order for the OptiMem Settings Wizard to suggest changes, the “Custom” settings must be in use.'
3:
Bounds: x1=78, y1=110, x2=372, y2=126
Type: -120
Info: 'Switch to the “Custom” active settings?'
4:
Bounds: x1=14, y1=9, x2=58, y2=53
Type: 64
Info: '0'
5:
Bounds: x1=14, y1=9, x2=58, y2=53
Type: -96
Info: '0'
DITL_406.txt
Items: (5 entries)
0:
Bounds: x1=325, y1=134, x2=393, y2=154
Type: 4
Info: 'OK'
1:
Bounds: x1=78, y1=134, x2=223, y2=154
Type: 4
Info: 'Re-Open Application'
2:
Bounds: x1=78, y1=11, x2=393, y2=122
Type: -120
Info: 'The application has been set to be OptiMized.If the application does not work well, try increasing the “Initial memory block size” or selecting a different “Optimization method.”(Check “More,” & use “Balloon Help” for hints.)'
3:
Bounds: x1=14, y1=9, x2=58, y2=53
Type: 64
Info: '0'
4:
Bounds: x1=14, y1=9, x2=58, y2=53
Type: -96
Info: '0'
DITL_405.txt
Items: (4 entries)
0:
Bounds: x1=287, y1=63, x2=355, y2=83
Type: 4
Info: 'OK'
1:
Bounds: x1=78, y1=11, x2=356, y2=45
Type: -120
Info: 'No changes have been made to the application’s settings.'
2:
Bounds: x1=14, y1=9, x2=58, y2=53
Type: 64
Info: '0'
3:
Bounds: x1=14, y1=9, x2=58, y2=53
Type: -96
Info: '0'
DITL_404.txt
Items: (5 entries)
0:
Bounds: x1=296, y1=135, x2=364, y2=155
Type: 4
Info: 'OK'
1:
Bounds: x1=78, y1=135, x2=222, y2=155
Type: 4
Info: 'Re-Open Application'
2:
Bounds: x1=78, y1=11, x2=365, y2=123
Type: -120
Info: 'The application has been switched to its “Custom” settings, allowing changes.You may return to the “Standard” settings by using the pull down menu labeled “Active Settings” in the “OptiMem Settings For Individual Applications” window.'
3:
Bounds: x1=14, y1=9, x2=58, y2=53
Type: 64
Info: '0'
4:
Bounds: x1=14, y1=9, x2=58, y2=53
Type: -96
Info: '0'
DITL_403.txt
Items: (5 entries)
0:
Bounds: x1=287, y1=64, x2=355, y2=84
Type: 4
Info: 'OK'
1:
Bounds: x1=81, y1=64, x2=227, y2=84
Type: 4
Info: 'Re-Open Application'
2:
Bounds: x1=78, y1=11, x2=359, y2=45
Type: -120
Info: 'The requested changes have been made.'
3:
Bounds: x1=14, y1=9, x2=58, y2=53
Type: 64
Info: '0'
4:
Bounds: x1=14, y1=9, x2=58, y2=53
Type: -96
Info: '0'
DITL_402.txt
Items: (5 entries)
0:
Bounds: x1=317, y1=134, x2=376, y2=154
Type: 4
Info: 'OK'
1:
Bounds: x1=77, y1=134, x2=223, y2=154
Type: 4
Info: 'Re-Open Application'
2:
Bounds: x1=78, y1=11, x2=380, y2=122
Type: -120
Info: 'The requested changes have been made.If the new settings do not work well, you may return to your previous settings using the “Restore” button shown in OptiMem Settings window (the “more” option must be checked).'
3:
Bounds: x1=14, y1=9, x2=58, y2=53
Type: 64
Info: '0'
4:
Bounds: x1=14, y1=9, x2=58, y2=53
Type: -96
Info: '0'
DITL_401.txt
Items: (7 entries)
0:
Bounds: x1=337, y1=133, x2=405, y2=153
Type: 4
Info: 'Backup'
1:
Bounds: x1=78, y1=133, x2=193, y2=153
Type: 4
Info: 'Cancel Changes'
2:
Bounds: x1=225, y1=133, x2=324, y2=153
Type: 4
Info: 'Don’t Backup'
3:
Bounds: x1=78, y1=105, x2=407, y2=121
Type: -120
Info: 'Backup previous settings before saving changes?'
4:
Bounds: x1=78, y1=11, x2=405, y2=108
Type: -120
Info: 'The Settings Wizard is about to save changes for“^0.”If you backup the previous settings first, then you will be able to restore them easily if the new settings are no better.'
5:
Bounds: x1=14, y1=9, x2=58, y2=53
Type: 64
Info: '0'
6:
Bounds: x1=14, y1=9, x2=58, y2=53
Type: -96
Info: '0'
DITL_400.txt
Items: (5 entries)
0:
Bounds: x1=317, y1=134, x2=376, y2=154
Type: 4
Info: 'OK'
1:
Bounds: x1=77, y1=134, x2=197, y2=154
Type: 4
Info: 'Cancel Report'
2:
Bounds: x1=78, y1=11, x2=380, y2=122
Type: -120
Info: 'The OptiMem Settings Wizard is able to report on the memory use of a selected application, after it has been in operation.Would you like the Wizard to report on the recent use of “^0”?'
3:
Bounds: x1=14, y1=9, x2=58, y2=53
Type: 64
Info: '0'
4:
Bounds: x1=14, y1=9, x2=58, y2=53
Type: -96
Info: '0'
DITL_306.txt
Items: (4 entries)
0:
Bounds: x1=297, y1=138, x2=381, y2=158
Type: 4
Info: 'OK'
1:
Bounds: x1=78, y1=11, x2=384, y2=124
Type: -120
Info: 'Without enabling Virtual Memory on your Macintosh you cannot set this application’s sizes below ^0K.It is recommended the you enable Virtual Memory in the “Memory” Control Panel, setting it to the lowest value allowed.'
2:
Bounds: x1=14, y1=9, x2=58, y2=53
Type: 64
Info: '0'
3:
Bounds: x1=14, y1=9, x2=58, y2=53
Type: -96
Info: '0'
DITL_305.txt
Items: (4 entries)
0:
Bounds: x1=297, y1=138, x2=381, y2=158
Type: 4
Info: 'OK'
1:
Bounds: x1=78, y1=11, x2=384, y2=124
Type: -120
Info: 'Enabling Virtual Memory on your Macintosh will save memory when running most any native application.It is recommended the you enable Virtual Memory in the “Memory” Control Panel, setting it to the lowest value allowed.'
2:
Bounds: x1=14, y1=9, x2=58, y2=53
Type: 64
Info: '0'
3:
Bounds: x1=14, y1=9, x2=58, y2=53
Type: -96
Info: '0'
DITL_304.txt
Items: (5 entries)
0:
Bounds: x1=293, y1=125, x2=398, y2=145
Type: 4
Info: 'Keep Current'
1:
Bounds: x1=74, y1=125, x2=202, y2=145
Type: 4
Info: 'Revert to Default'
2:
Bounds: x1=225, y1=125, x2=283, y2=145
Type: 4
Info: 'Cancel'
3:
Bounds: x1=74, y1=7, x2=396, y2=105
Type: -120
Info: 'Before starting to auto-adjust, would you like to revert to the original default values or keep the current ones?Note: Auto-adjust stops itself after no change is needed during four consecutive sessions.'
4:
Bounds: x1=20, y1=10, x2=52, y2=42
Type: -96
Info: ' '
DITL_303.txt
Items: (5 entries)
0:
Bounds: x1=293, y1=125, x2=398, y2=145
Type: 4
Info: 'Keep Current'
1:
Bounds: x1=74, y1=125, x2=202, y2=145
Type: 4
Info: 'Revert to Default'
2:
Bounds: x1=225, y1=125, x2=283, y2=145
Type: 4
Info: 'Cancel'
3:
Bounds: x1=74, y1=7, x2=396, y2=105
Type: -120
Info: 'In disabling auto-adjust, would you like to revert to the original default values or keep using the current ones?Note: Auto-adjust stops itself after no change is needed during four consecutive sessions.'
4:
Bounds: x1=20, y1=10, x2=52, y2=42
Type: -96
Info: ' '
DITL_302.txt
Items: (5 entries)
0:
Bounds: x1=267, y1=128, x2=415, y2=148
Type: 4
Info: 'Restore Last Backup'
1:
Bounds: x1=141, y1=128, x2=257, y2=148
Type: 4
Info: 'Restore Default'
2:
Bounds: x1=74, y1=128, x2=131, y2=148
Type: 4
Info: 'Cancel'
3:
Bounds: x1=74, y1=7, x2=415, y2=85
Type: -120
Info: 'By restoring previous settings you will loose the current values!Which previous settings would you like to restore?'
4:
Bounds: x1=20, y1=10, x2=52, y2=42
Type: -96
Info: ' '
DITL_301.txt
Items: (5 entries)
0:
Bounds: x1=267, y1=128, x2=415, y2=148
Type: 64
Info: ' â'
1:
Bounds: x1=141, y1=128, x2=257, y2=148
Type: 4
Info: 'Restore Default'
2:
Bounds: x1=74, y1=128, x2=131, y2=148
Type: 4
Info: 'Cancel'
3:
Bounds: x1=74, y1=7, x2=415, y2=104
Type: -120
Info: 'By restoring previous settings you will loose the current values!There are no previous backup settings to be restored. Would you like to restore the original default settings?'
4:
Bounds: x1=20, y1=10, x2=52, y2=42
Type: -96
Info: ' '
DITL_300.txt
Items: (4 entries)
0:
Bounds: x1=299, y1=148, x2=358, y2=168
Type: 4
Info: 'OK'
1:
Bounds: x1=184, y1=148, x2=284, y2=168
Type: -120
Info: ''
2:
Bounds: x1=20, y1=10, x2=52, y2=42
Type: -96
Info: ' '
3:
Bounds: x1=74, y1=7, x2=360, y2=126
Type: -120
Info: 'After changing the application size, the Finder’s Get Info window may incorrectly show the old values, until you restart your Macintosh. Even when Get Info is out-of-date, your changes are effective immediately.'
DITL_268.txt
Items: (3 entries)
0:
Bounds: x1=276, y1=187, x2=334, y2=207
Type: 4
Info: 'OK'
1:
Bounds: x1=75, y1=10, x2=336, y2=174
Type: -120
Info: '^0^1^2^3'
2:
Bounds: x1=20, y1=10, x2=52, y2=42
Type: -96
Info: ' '
DITL_229.txt
Items: (4 entries)
0:
Bounds: x1=311, y1=131, x2=375, y2=151
Type: 4
Info: 'OK'
1:
Bounds: x1=234, y1=131, x2=298, y2=151
Type: 4
Info: 'Cancel'
2:
Bounds: x1=73, y1=7, x2=376, y2=119
Type: -120
Info: '^0^1^2^3'
3:
Bounds: x1=20, y1=10, x2=52, y2=42
Type: -96
Info: ' '
DITL_228.txt
Items: (3 entries)
0:
Bounds: x1=276, y1=87, x2=334, y2=107
Type: 4
Info: 'OK'
1:
Bounds: x1=75, y1=10, x2=336, y2=74
Type: -120
Info: '^0^1^2^3'
2:
Bounds: x1=20, y1=10, x2=52, y2=42
Type: -96
Info: ' '
DITL_130.txt
Items: (28 entries)
0:
Bounds: x1=304, y1=244, x2=372, y2=264
Type: 4
Info: 'Save'
1:
Bounds: x1=230, y1=244, x2=294, y2=264
Type: 4
Info: 'Cancel'
2:
Bounds: x1=76, y1=195, x2=297, y2=215
Type: 7
Info: '@'
3:
Bounds: x1=337, y1=196, x2=369, y2=228
Type: -96
Info: '='
4:
Bounds: x1=0, y1=274, x2=382, y2=288
Type: -120
Info: ' General OptiMem RAM Charger Preferences'
5:
Bounds: x1=77, y1=176, x2=231, y2=192
Type: 7
Info: ''
6:
Bounds: x1=245, y1=178, x2=282, y2=190
Type: 16
Info: ''
7:
Bounds: x1=14, y1=9, x2=58, y2=53
Type: 64
Info: '0'
8:
Bounds: x1=14, y1=9, x2=58, y2=53
Type: 32
Info: '0'
9:
Bounds: x1=338, y1=8, x2=373, y2=22
Type: 5
Info: ''
10:
Bounds: x1=357, y1=8, x2=373, y2=24
Type: -64
Info: ' à'
11:
Bounds: x1=77, y1=156, x2=311, y2=172
Type: 7
Info: ''
12:
Bounds: x1=303, y1=196, x2=335, y2=228
Type: -96
Info: '<'
13:
Bounds: x1=288, y1=178, x2=299, y2=193
Type: -120
Info: 'K'
14:
Bounds: x1=77, y1=11, x2=318, y2=27
Type: 7
Info: ''
15:
Bounds: x1=76, y1=215, x2=297, y2=235
Type: 7
Info: 'A'
16:
Bounds: x1=77, y1=41, x2=337, y2=57
Type: 7
Info: ''
17:
Bounds: x1=300, y1=240, x2=376, y2=268
Type: -64
Info: ' á'
18:
Bounds: x1=242, y1=175, x2=285, y2=193
Type: -64
Info: ' Ä'
19:
Bounds: x1=77, y1=26, x2=320, y2=42
Type: 7
Info: ''
20:
Bounds: x1=77, y1=64, x2=299, y2=80
Type: 7
Info: ''
21:
Bounds: x1=77, y1=79, x2=358, y2=95
Type: 7
Info: ''
22:
Bounds: x1=78, y1=103, x2=367, y2=128
Type: -120
Info: 'As a shortcut to switch application settings between OptiMized or not, press the selected keys while the application is opening:'
23:
Bounds: x1=98, y1=128, x2=154, y2=144
Type: 7
Info: ''
24:
Bounds: x1=158, y1=128, x2=215, y2=144
Type: 7
Info: ''
25:
Bounds: x1=218, y1=128, x2=274, y2=144
Type: 7
Info: ''
26:
Bounds: x1=278, y1=128, x2=344, y2=144
Type: 7
Info: ''
27:
Bounds: x1=0, y1=0, x2=0, y2=0
Type: -127
Info: ' Ç'
DITL_128.txt
Items: (14 entries)
0:
Bounds: x1=16677, y1=263, x2=16727, y2=283
Type: 4
Info: 'OK'
1:
Bounds: x1=0, y1=0, x2=358, y2=289
Type: 0
Info: ''
2:
Bounds: x1=0, y1=288, x2=176, y2=302
Type: -120
Info: ' •••NOT INSTALLED•••'
3:
Bounds: x1=6, y1=103, x2=172, y2=201
Type: -120
Info: 'Special thanks for the enthusiasm and creative suggestions from many early users of OptiMem. We only wish we could use all the good ideas.Written by: Robert Thornton& Cris Mooney. Thanks alsoto many others, including'
4:
Bounds: x1=168, y1=288, x2=274, y2=302
Type: -120
Info: ''
5:
Bounds: x1=156, y1=288, x2=356, y2=302
Type: -120
Info: ' Version '
6:
Bounds: x1=6, y1=3, x2=343, y2=54
Type: -120
Info: 'OptiMem RAM Charger is advanced memory management for Macintosh computers. It dynamically OptiMizes the use of memory by well-behaved application programs. So you not only get more usable memory but more power where you need it.'
7:
Bounds: x1=199, y1=118, x2=309, y2=228
Type: 64
Info: '0'
8:
Bounds: x1=199, y1=118, x2=309, y2=228
Type: -96
Info: '0'
9:
Bounds: x1=6, y1=59, x2=332, y2=97
Type: -120
Info: 'OptiMization is performed on each application program individually. That means you can adjust the OptiMization Settings for each program separately in order to work with any combination you choose.'
Info: 'This copy of OptiMem did not load at startup after finding an incompatible extension in the system (probably an out-of-date version of OptiMem).It will not OptiMize applications until you remove the conflict and restart your computer.'
2:
Bounds: x1=20, y1=10, x2=52, y2=42
Type: -96
Info: ' '
DITL_-4034_Extension Shut Off.txt
Items: (2 entries)
0:
Bounds: x1=277, y1=146, x2=345, y2=166
Type: 4
Info: 'OK'
1:
Bounds: x1=73, y1=7, x2=346, y2=135
Type: -120
Info: 'This copy of OptiMem has been turned off by the control panel.It will not OptiMize any applications which are started until it is turned back on. Any applications already being OptiMized will continue to be OptiMized until they are quit.'
DITL_-4036.txt
Items: (4 entries)
0:
Bounds: x1=299, y1=148, x2=358, y2=168
Type: 4
Info: 'OK'
1:
Bounds: x1=184, y1=148, x2=284, y2=168
Type: -120
Info: ''
2:
Bounds: x1=20, y1=10, x2=52, y2=42
Type: -96
Info: ' '
3:
Bounds: x1=74, y1=7, x2=358, y2=135
Type: -120
Info: 'The Largest Unused Block is not enough memory to open this program. Closing windows and quitting programs can help.Using the OptiMem control panel to OptiMize and tune an application’s settings might reduce this initial block requirement.'
DITL_-4047.txt
Items: (4 entries)
0:
Bounds: x1=306, y1=163, x2=374, y2=183
Type: 4
Info: 'OK'
1:
Bounds: x1=73, y1=7, x2=376, y2=71
Type: -120
Info: 'This copy of OptiMem was not activated at startup. Although memory OptiMization is not provided in this state, some of the control panel and settings functions are available.'
2:
Bounds: x1=20, y1=10, x2=52, y2=42
Type: -96
Info: ' '
3:
Bounds: x1=73, y1=87, x2=370, y2=151
Type: -120
Info: 'To activate, the OptiMem file must be in the Control Panels folder (and not turned off in the OptiMem Settings Preferences window) when the computer is restarted.'
DITL_-4048_Can’t Open Size Prefs.txt
Items: (3 entries)
0:
Bounds: x1=277, y1=146, x2=345, y2=166
Type: 4
Info: 'OK'
1:
Bounds: x1=73, y1=7, x2=348, y2=134
Type: -120
Info: 'OptiMem is unable to access its settings files correctly!This can happen if free memory is very low or another program has OptiMem’s private files open.If one of these is not the cause, reinstall using the original OptiMem disk.'